ELA Newsletter Spring Summer 2026
A word from the president

I have called it the “Nordic Trip”: a journey which, together with our Secretary General, took me last June to meet, in the following order, SUHY (Helsinki), HLF (Oslo) and ELEVATORBRANCHEN (Copenhagen).
Meetings with ELA Members always represent a valuable opportunity to exchange views on the most topical issues and, naturally, to review and assess our respective priorities.
A wide range of topics were discussed during these meetings, including:
- Labour and workforce recruitment (campaign initiatives)
- Education and skills (training facilities and the elevator technician career pathway)
- Safety (also in connection with the ELA initiative – European Safety Day)
- Inspection (methods and frequency)
- Standardisation (needs and expectations)
- Cooperation with local authorities (possible support from ELA)
- Communication campaigns (promoting the sector through all available social media channels)
- Recap (joint opportunities and potential areas for collaboration)
In regards to our relations beyond Europe, I would also like to highlight the further consolidation of our cooperation with the ten international associations that are members of the World Elevator & Escalator Federation (WEEF). In this context, a new Memorandum of Understanding (MoU) was signed last May with representatives of the China Elevator Association (CEA) during WEE Expo in Guangzhou.
In October I attended the LiftExpo Poland in Warsaw, at the invitation of PALM. The conference included a session entitled “The Impact of EN ISO 8100-1/2 on the Elevator Industry”, featuring contributions from a number of experts from our Association.
This was followed by the Nordic Lift Expo, which took place on 10 November, where I attended once again as a guest together with our Secretary General of HISSFORBUNDET. I was also able to deliver a presentation as part of the conference programme.
Finally, I would like to recall the last, but certainly no less important, international event of 2026. I am referring to the event organised by the International Elevator & Escalator Symposium (IEES) in Amsterdam on 10–11 December, focusing on the theme “Passenger Experience, Access, Design and Safety.” This will also be an important opportunity to further strengthen and consolidate our relationships at international level.
As I am already looking ahead to the content of our next newsletter, I wish you all an enjoyable read.
Meet our new ELA Committees & WG members
![]() Daniel Bisang(EEA), new member of the Lifts & Machinery WG What is something members might be surprised to learn about you? I am a passionate sportsman who finds inspiration in both participating in sport and experiencing it firsthand at sporting events. The atmosphere, energy, mutual respect, and spirit of fair play motivate me and offer valuable lessons for life. Sport has been a lifelong coach, teaching discipline, resilience, and respect for achievement. Swimming is especially important to me; every Sunday morning I swim early, creating time to reflect, stay active, and gain inspiration by looking inward and reconnecting with myself. | ![]() Ana Efata (EEA), re-appointment as Chair of the SE&T Committee What is something members might be surprised to learn about you? Since working in safety, I have an occupational reflex I can’t turn off. All activities trigger an automatic mental audit of what could go wrong and how fast things could escalate. I can’t unsee the risk which can be mentally exhausting, I have to remind myself that not every environment is my job site. What book, podcast or tv show would you recommend? Book: The Alchemist by Paulo Coelho. This book is one of the best ever written. The book teaches a lot of great life lessons which I can relate to. TV Show: I don’t watch or listen to podcasts but TV Show I recommend would be Game of Thrones. I can rewatch GoT, any time, any episode as it offers insights into human nature, leadership, and survival. |
![]() Reto Moor (EEA), new member of the Codes & Standards Committee What is something members might be surprised to learn about you? Table tennis has been a major part of my life ever since I was a child. Over the years, I’ve spent countless hours playing and competing, developing a deep passion and understanding for the game. However, my greatest success in the sport didn’t come from a match I played myself—it happened from the coaching bench. At the Swiss National Championships, I had the privilege of coaching a teammate, and watching her go all the way to win the Swiss Champion title. What book, podcast or tv show would you recommend? If you’re looking for some light amusement, I recommend the Enola Holmes books and movies. As Sherlock Holmes’ younger sister, Enola is a remarkable protagonist – she is brave, courageous, clever and full of heart. Both the books and the films are thoroughly entertaining and keep you hooked while leaving a smile on your face. | ![]() Stefan Rohr (VFA-Interlift), new member of the Components Committee What is something members might be surprised to learn about you? I have always enjoyed innovating and creating new things. As a student, I took part in the Jugend forscht competition several times and won the chemistry prize in 1994. I joined the elevator industry in 2008 and have been passionate about it ever since. At ELGO, I designed the Limax Compact series, including its contactless SIL-rated switching technology. Since 2025, I have been the owner and CEO of Cobianchi Liftteile AG. There, I am developing a new generation of intelligent safety gears. We call them mechatronic safety gears because they combine mechanical safety with electronic intelligence. What book, podcast or TV show would you recommend? If I had to recommend something, I wouldn’t choose a book or a TV show. I’d recommend a workshop or lab where you can tinker and create things. That’s much more fun! |
Julian Söller (VDMA), new member of the Energy & Environment Committee What is something members might be surprised to learn about you? Outside my professional work, I am passionate about woodworking and cultural projects. Four years ago, I co-founded prima e.V., an association that organises cultural events in public spaces. I have also participated in several woodworking workshops in Poland, combining my interest in craftsmanship, design and collaborative projects. prima (@prima.ev) • Instagram-Fotos und -Videos prima e.V. Website (Unfortunately, only in German) Pavilion for Arts Crafts Club – Mood for Wood (The structure of my group from one of the woodworking workshops in Poland) What book, podcast or tv show would you recommend ? SWR Handwerkskunst (Channel: SWR, Titel: The art of craftsmanship) SWR Handwerkskunst – YouTube My recommendation is a German TV and YouTube series dedicated to the art of craftsmanship. Through calm, detailed storytelling, it shows how materials, tools and experience come together to create a finished product. I particularly enjoy how it demonstrates that perfection can often be found in simplicity, precision and craftsmanship. | Kurt Steiner (VSA), new member of the Product Ecology WG What is something members might be surprised to learn about you? People might be surprised to learn that I enjoy long-distance hiking and endurance walking events. I have completed “Mammutmärsche/Megamärsche” of up to 75 km in a single day. I enjoy the combination of training, resilience and perseverance required to reach the finish line. It has also shaped my mindset in business: most meaningful achievements are not sprints, but long journeys that require patience, adaptability and determination. What book, podcast or TV show would you recommend? I would recommend “The Lord of the Rings“. Beyond being a fantastic story, it offers valuable lessons about leadership, teamwork, resilience and long-term thinking. Recently, I had the opportunity to visit both the filming locations and the Wētā Workshops in New Zealand, where many of the props and special effects were created. This made me appreciate even more the incredible craftsmanship and vision behind the books and films. |
![]() Jussi Valkiainen (SUHY), new member of the Digitalization & Cybersecurity Committee What is something members might be surprised to learn about you? In my free time, I am an avid board gamer and run a tabletop role-playing game. What book, podcast or TV show would you recommend? A TV show I am currently watching and would absolutely recommend is The Bureau (2015-2020). | ![]() Peipei Wang (VFA-Interlift), new member of the Components Committee |
Changes in the Leadership of the Codes & Standards Committee and the Lifts & Machinery Working Group
After many years of distinguished service, Carsten Henriksen will step down as Chair of the Codes & Standards Committee at the end of this year, relinquishing all the positions he has held on behalf of ELA, including those within CEN/TC 10, ISO/TC 178 and NB-L. Daniel Bisang, new Chair, will also succeed Carsten as ELA’s representative in the European Commission’s Expert Group on Lifts. Our heartfelt thanks go to Carsten for his many years of dedicated service, together with our very best wishes to Daniel as he takes on these important responsibilities.
Esfandiar Gharibaan, who has chaired the Lifts & Machinery Working Group for many years, will also be handing over the reins to Marko Karppinen, already a very active member of the Working Group. Esfandiar leaves behind a significant legacy, having effectively led, over the years, the complex work of analysing and examining the key issues of interest to our industry. Marko will become ELA’s new representative in the European Commission’s Expert Group on Machinery, while Esfandiar will continue to be a member of the Lifts & Machinery Working Group. Our sincere thanks to both of them for their commitment and for the contribution they will continue to provide to our Association.
Our sincere thanks go to Roger Beuret, whose contribution and leadership have enabled the Product Ecology Working Group, over the years and with the utmost professionalism, to ensure that issues of considerable sensitivity and importance to our industry have been carefully monitored and addressed. We are confident that, from next year onwards, Kurt Steiner will build on this valuable legacy and, with the support of the other highly respected members of the Group, further strengthen our efforts in these important areas.
Our heartfelt thanks to Roger for his dedication and valuable contribution, and our very best wishes to Kurt for success in his new role.
Revised Product Category Rules (PCR) for EPD creation
Environmental Product Declarations (EPD) as independently verified Life Cycle Assessment
(LCA)-based environmental statements according to ISO 14025:2026, must follow clearly defined Product Category Rules (PCRs). These PCRs, published by a Programme Operator, provide requirements and guidelines for developing an EPD for a specific product category.
The Programme Operator “International EPD® System” has revised and published its General Programme Instruction (GPI) v5.0.0 in 2024 and its main PCR for construction products PCR 2019:14 v2.0.0 in 2025. ELA, represented by members of the working group Product Ecology, has participated in the revision process, including public consultation, and successfully influenced the outcome of these revisions.
Further ELA had a leading role in the creation of complementary PCRs for lifts since 2013 and for escalators and moving walks since 2023 providing product specific rules, requirements, and guidance for developing an EPD. Due to the expiry of the validity and based on the latest versions of GPI and PCR 2019:14, ELA with its working group Product Ecology strongly engaged in the revision of the c-PCR-008 for lifts under the moderation mandated to Nikolay Minkov of Greentability Ltd.
The c-PCR-008 Lifts v2.0.0, published in November 2025 and valid until 27 November 2029, is now in force for the development of EPDs since 1 May 2026. It can be found in the PCR library under: https://www.environdec.com/pcr-library/pcr_bc9b668e-0689-4f7b-5d33-08de2daa222d.
The c-PCR-025 Escalators and moving walks v1.0.0, still valid until 8 June 2028, will undergo a revision expected to start in the second half of 2027 to align with the latest version of GPI and PCR 2019:14. It can be found under: https://www.environdec.com/pcr-library/pcr_a81ba2ec-e047-4912-6b79-08d9caad768c.
These c-PCRs will serve the lift and escalator industry towards credible, fair and transparent communication of the environmental impacts of lifts, escalators and moving walks. ELA thanks the Moderator, Nikolay Minkov, the members of WG Product Ecology and the stakeholders participating in the revisions.
Ecological Data Collection
This year the WG Product Ecology has launched its third EcoData Collection.
After the analysis of lifts sold in 2019 and 2022, the lifts sold in 2025 have been studied in regards of their ecological performance.
A detailed analysis of the results is ongoing and is foreseen to be presented at next year’s general assembly, but first trends are already visible now.
Based on the results of the reporting ELA members, the average energy consumption of lifts has decreased once more.
The main reason for this is a continuous trend to use more energy efficient components and design options, which have already been available some time, but have become more popular or even a standard feature over time. Since 2019 the use of LEDs for car lighting has increased from 89% to almost 100% and the ratio of gearless synchronous machines amongst traction lifts has increased from 73% to about 99%.
Further the ratios of lifts with energy recuperation units and of lifts with a counterweight balancing of less than 45% are continuously growing and supporting the steady decreasing energy consumption of lifts in Europe.
ELA Taskforce on EPBD
The Energy Performance of Buildings Directive EPBD – EU/2024/1275 – is the EU’s primary law governing the sustainability of buildings, providing energy efficiency measures for new and existing buildings, and leveraging decarbonization enablers.
In light of the importance of the EPBD, a dedicated task force was set to assess its implications, develop a strategic position and submit a recommendation to the ELA Board (lifts and escalators included, excluded or neutral) with a view to establishing a unified ELA position.
The Taskforce, led by Claudio Donghi and composed by a cross-competence team, held the kick-off at the end of July and follow-up meetings were scheduled in September and October.
A survey has been deployed to collect the views from ELA members on the EPBD. Ths task force is looking forward to receiving the answers to consolidate an overview of the national positions.
ELA General Assembly & Conference 27 & 28 May, Rotterdam

This year’s annual General Assembly and conference took place in the heart of Rotterdam. Under the theme « The impact of AI on vertical mobility », the conference brought together enthusiasts from across the sector and sparked conversations about the future of the industry.
After a full day of presentations and discussions, members were able to relax and enjoy a memorable gala dinner on the water, thanks to our member VLR. The boat cruised through the city, showcasing the beauty of Rotterdam while lively conversations carried on on board.
This year’s events showed that the sector is becoming more and more dynamic, attracting new players and gaining momentum.
The conference presentations are available on our website, so you can revisit the sessions and continue the conversation.
A warm thank you to everyone who contributed to making this edition a success.
See you next year!
ELA Newsletter Quiz: Myth or Fact?
How well do you know the lift and escalator industry?
Read the statements below and decide whether they are Myth or Fact. Answers are at the bottom.
1. The safety brake that prevents a lift from falling freely was first publicly demonstrated by Elisha Otis in 1854.
☐ Myth ☐ Fact
2. The first electric lift was presented by Werner von Siemens in Mannheim in 1880
☐ Myth ☐ Fact
3. The Lifts Directive 2014/33/EU also covers lifts on ships and in mines
☐ Myth ☐ Fact
4. Modern lifts generate electricity while traveling downward with a heavy load
☐ Myth ☐ Fact
5. The EU Lifts Directive (2014/33/EU) regulates every single lift in a building, including slow stairlifts and escalators.
☐ Myth ☐ Fact
- Fact.
Otis demonstrated his safety brake at the New York World’s Fair (Crystal Palace) in 1854. He had the hoisting rope cut while he stood on the platform, and the brake held.
- Fact.
Werner von Siemens presented the first electric lift at the Mannheim exhibition in 1880. It used a motor mounted beneath the cabin to climb a toothed rack tower 20 meters high.
- Myth.
Lifts on ships, in mines, on construction sites and in similar installations are outside the Directive’s scope.
- Fact.
When a heavily loaded car travels down, the motor acts as a generator. With a regenerative drive, that energy is fed back into the building’s grid. Without one, it is dissipated as heat in a braking resistor.
- Myth.
Directive 2014/33/EU excludes escalators, moving walkways, and slow-moving lifting appliances (such as stairlifts and platform lifts traveling at speeds of 0.15 m/s or less). Those devices are regulated separately under the EU Machinery Directive






